LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Rear Compartment Lid Switch Replacement (Domestic) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector At Rear Compartment Lid Release Switch
    GM158135Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the rear compartment lid release switch.
  2. Install the switch.

    Align the switch to the opening in the trim panel, then push to secure.

scientia non olet · About LEMON Manuals