LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Compartment Side Body Panel
    GM171268Courtesy of GENERAL MOTORS CORP.
  1. Position the valve to the opening with the cloth flaps hanging down.
  2. Snap the valve to the rear panel.

    Push firmly at each of the four snap locations.

  3. Install the rear corner carpet panel.
scientia non olet · About LEMON Manuals