LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Latch Striker Replacement - Rear Lift Window Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Compartment Lift Window
    GM71234Courtesy of GENERAL MOTORS CORP.
  1. Position the striker to the lift window panel with the short end of the striker facing forward.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts attaching the striker.

    Tighten:  Tighten the lift window latch striker bolts to 10 N.m (89 lb in).

  3. Close the lift window.
scientia non olet · About LEMON Manuals