LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Fuel Filler Door Release Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Filler Door Release Switch At Underside Of The Console
    GM95713Courtesy of GENERAL MOTORS CORP.
  1. Position the fuel filler door release switch to the underside of the console.
  2. Push the switch to secure the switch retaining tabs.
  3. Connect the electrical connector to the switch.
  4. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
scientia non olet · About LEMON Manuals