LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Compartment Lid Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Compartment Lid
    GM214003Courtesy of GENERAL MOTORS CORP.
    NOTE: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
  1. Open and support the rear compartment lid.
  2. Mark the location of the hinges to the lid to aid in installation.
  3. Remove the bolts attaching the hinges to the lid.
  4. With an assistant, remove the rear compartment lid.
scientia non olet · About LEMON Manuals