Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Side Garnish Moldings

Courtesy of GENERAL MOTORS CORP.

Remove the windshield side garnish moldings.
1. Grasp the windshield side garnish molding.
2. Pull the molding with its retainers from the windshield frame.

Fig 2: Inside Rearview Mirror

Courtesy of GENERAL MOTORS CORP.

Remove the inside rearview mirror.
1. Disconnect the inside rearview mirror electrical connector.
2. Loosen the mirror mount tension screw.
3. Slide the mirror up off the mirror bracket.

Fig 3: Electrical Connector & Sunshade

Courtesy of GENERAL MOTORS CORP.

Remove the sunshades. Refer to Sunshade Replacement in Interior Trim.

Fig 4: Garnish Molding To Windshield Frame

Courtesy of GENERAL MOTORS CORP.

Grasp the upper garnish molding and pull the garnish molding with its retainers from the windshield frame.