LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Trim Replacement - Lock Pillar (Upper Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seatbelt Upper Guide To Stud
    GM213980Courtesy of GENERAL MOTORS CORP.
  1. Open the upper guide bolt cover by prying up at the belt side of the cover.
  2. Remove the nut attaching the upper guide to the seat belt guide bracket stud.
  3. Remove the seatbelt upper guide from the stud.
    4. Fig 2: Screw At Lock Pillar Upper Trim
    GM214020Courtesy of GENERAL MOTORS CORP.
  4. Remove the spacer and washer from the stud.
  5. Remove the screw attaching the lock pillar upper trim.
  6. Remove the upper trim.
scientia non olet · About LEMON Manuals