Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lock Pillar Trim Panel To Lock Pillar & Side Rail

Courtesy of GENERAL MOTORS CORP.

Remove the sill plate. Refer to Door Sill Plate Replacement .
Pull the lock pillar trim panel with retainers from the lock pillar and the side rail.

Fig 2: Lock Pillar Trim At Rear Compartment Side Trim Panel

Courtesy of GENERAL MOTORS CORP.

Slide the lock pillar trim out from under the rear compartment side trim panel.
Separate the trim panel from the seat belt.
Remove the lock pillar trim.