LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Trim Replacement - Hinge Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hinge Pillar Upper Trim To Hinge Pillar
    GM71211Courtesy of GENERAL MOTORS CORP.
  1. Remove the fastener attaching the top of the upper trim panel and the windshield side garnish molding to the hinge pillar.
  2. Unsnap the hinge pillar upper trim from the hinge pillar.
  3. Remove the hinge pillar upper trim.
  4. Remove the lower hinge pillar trim if needed. The lower trim is part of the sill plate. Refer to Door Sill Plate Replacement .
scientia non olet · About LEMON Manuals