LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Trim Replacement - Hinge Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hinge Pillar Upper Trim To Hinge Pillar
    GM71211Courtesy of GENERAL MOTORS CORP.
  1. Snap the hinge pillar trim to the hinge pillar.
  2. Install the fastener attaching the top of the trim.
  3. Install the lower trim panel (sill plate) if removed. Refer to Door Sill Plate Replacement .
scientia non olet · About LEMON Manuals