LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Compartment Front Side (Convertible) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pin At Front Of Side Trim Panel
    GM214022Courtesy of GENERAL MOTORS CORP.
  1. Position the side trim panel with the front edge of the panel under the lock pillar flange.
  2. Install the push pin attaching the panel to the lock pillar.
  3. Align the panel clips to the holes in the housing.
  4. Press the panel at the clip locations to secure the clips.
scientia non olet · About LEMON Manuals