LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Kick-Up Panel Replacement - Front Floor >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Kick-Up Panel Upper Latches
    GM71195Courtesy of GENERAL MOTORS CORP.
  1. Open the latches on the kick-up panel.
  2. Position the kick-up panel to the opening in the floor and insert the kick-up panel lower tabs into the slots in the multi-use bracket.
  3. Close the panel and push the latches into the holes.
  4. Engage the latches.
scientia non olet · About LEMON Manuals