LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1518 (Interior Trim) >> Repair Instructions >> Compartment Lid Extension - Folding Top Stowage >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Extension Panel To Bracket With Latch Manual Release Cable At Under The Panel
    GM214013Courtesy of GENERAL MOTORS CORP.
  1. Position the extension panel to the bracket with the latch manual release cable extending out from under the panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts attaching the extension panel to the bracket.

    Tighten:  Tighten the extension panel bolts to 4 N.m (35 lb in).

  3. Closed the folding top stowage compartment lid.
scientia non olet · About LEMON Manuals