RPO U1S
Remote compact disc changer (available with ULO or UNO)
| Callout | Component Name |
|---|---|
| 1 | Front Door Speaker Assembly RH |
| 2 | Radio Control |
| 3 | Windshield Antenna |
| 4 | Rear Speaker Assembly RH |
| 5 | Antenna Buffer |
| 6 | Rear Lift Window Antenna Cable |
| 7 | Rear Lift Window Antenna |
| 8 | Remote CD Changer |
| 9 | Rear Speaker Assembly LH |
| 10 | Rear Lift Window Antenna Coaxial Extension Cable |
| 11 | Antenna Module |
| 12 | Front Windshield Antenna Coaxial Cable |
| 13 | Front Door Speaker Assembly LH |
| 14 | Radio Control Coaxial Cable |
| 15 | Bose® Signal Processing Module |
| Callout | Component Name |
|---|---|
| 1 | Front Door Speaker Assembly RH |
| 2 | Radio Control |
| 3 | Power Antenna Coaxial Extension Cable |
| 4 | Rear Speaker Assembly RH |
| 5 | Power Antenna Assembly |
| 6 | Remote CD Changer |
| 7 | Rear Speaker Assembly LH |
| 8 | Front Door Speaker Assembly LH |
| 9 | Bose® Signal Processing Module |
| Callout | Component Name |
|---|---|
| 1 | Front Door Speaker Assembly RH |
| 2 | Radio Control |
| 3 | Fixed Antenna Coaxial Extension Cable |
| 4 | Rear Speaker Assembly RH |
| 5 | Fixed Antenna Assembly |
| 6 | Remote CD Changer |
| 7 | Rear Speaker Assembly LH |
| 8 | Front Door Speaker Assembly LH |
| 9 | Bose® Signal Processing Module |
The following is included in each audio system:
- A radio control located in the instrument panel (I/P)
- A electronically tuned radio reception
- The following six speakers:
- Four door mounted speakers
- Two quarter mounted speakers
- A fixed antenna system (Hardtop)
- A diversity (dual) antenna system (Coupe)
- A power antenna system (Convertible)
- A THEFTLOCK® radio theft -deterrent system
The Electronically Tuned Receiver (ETR) utilizes a programmer and synthesizer to provide optimum sound reproduction. The ETR incorporates an electronic memory for preselected station and digital clock function. Reset the memory whenever the battery is disconnected.
Each system has a vacuum fluorescent (VF) display that coordinates with the other instrument panel (I/P) displays. The Body Control Module (BCM) controls the dimming of the display based on inputs from the I/P cluster which reads adjustments of the I/P cluster dimmer switch (rheostat). The Light Emitting Diode (LED) and the back lighting of the radio face is done with incandescent light powered directly by the I/P cluster dimmer switch (rheostat).