Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Open the I/P passenger compartment door.
Remove the screws retaining the passenger compartment door handle.

Fig 1: Passenger Compartment Door Handle
Courtesy of GENERAL MOTORS CORP.
Remove the door handle.

Fig 2: Key To Door Handle Lock Cylinder

Courtesy of GENERAL MOTORS CORP.

Insert the key into the door handle lock cylinder.
Turn the key 1/4 turn clockwise (LOCK position).
Release the lock cylinder retainer.
Insert a small diameter tool into the slot on the RH side of the door handle and depress and hold the lock cylinder retainer.

Fig 3: Key To Lock Cylinder

Courtesy of GENERAL MOTORS CORP.

Turn the key an additional 1/4 turn clockwise.
Pull to remove the lock cylinder.