Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the key into the lock cylinder.
- Insert the lock cylinder into the passenger compartment door handle.
Align the lock cylinder in the same position used for removal, then push to seat fully.
- Turn the key 1/4 turn counterclockwise to secure the lock cylinder retainer.
- Turn the key an additional 1/4 turn counterclockwise and remove.
- Inspect the operation of the lock cylinder.
The lock cylinder should only allow a 1/4 turn and should be securely retained in the door handle.
- Install the door handle to the passenger compartment.
- Install the passenger compartment door handle retaining screws.
- Close the passenger compartment door.