Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hinge To Console

Courtesy of GENERAL MOTORS CORP.

Position the console door hinge to the console.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts retaining the door hinge to the console.
Tighten: Tighten the console door hinge retaining nuts to 2.4 N.m (21 lb in).

Fig 2: Console Door To Door Hinge

Courtesy of GENERAL MOTORS CORP.

Position the console door to the door hinge.
Insert both door alignment pins into the hinge alignment holes.
Install the screws retaining the console door to the door hinge.
Tighten: Tighten the console door retaining screws to 1.9 N.m (17 lb in).
Install the console to the vehicle. Refer to Console Replacement .