LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1516 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Compartment Replacement - Instrument Panel (I/P) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Instrument Panel (I/P) Passenger Compartment Door
    GM636341Courtesy of GENERAL MOTORS CORP.
  1. Open the instrument panel (I/P) passenger compartment door.
  2. Disconnect the electrical connector from the I/P compartment lamp switch.
  3. Remove the trim plugs from the bottom of the compartment door.

    Reach behind the compartment door and push the plugs out. Use a suitable flat bladed tool on the front side to remove the plugs, if necessary.

  4. Remove the lower retaining bolts from the I/P compartment.
  5. Remove the side and upper retaining screws from the I/P compartment.
    6. Fig 2: I/P Compartment To Wiring Harness Connector
    GM636321Courtesy of GENERAL MOTORS CORP.
  6. Slowly pull the I/P compartment just enough to disconnect the wiring harness connector from the inflatable restraint module switch.
  7. Remove the I/P compartment.
scientia non olet · About LEMON Manuals