LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1516 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Courtesy Lamp Assembly To RH Lower Closeout Panel
    GM64671Courtesy of GENERAL MOTORS CORP.
  1. Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the LH lower closeout panel.
    2. Fig 2: LH Lower Closeout Panel And Push-In Retainers
    GM95689Courtesy of GENERAL MOTORS CORP.
  2. Remove the push-on retaining nut from the steering column bracket stud.
  3. Release the LH lower closeout panel push-in retainers from the I/P lower support beam.
  4. Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
  5. Lower and remove the closeout panel.

    Release the notch in the RH forward edge of the closeout panel from the tab on the accelerator pedal bracket.

scientia non olet · About LEMON Manuals