LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1516 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: LH Lower Closeout Panel And Push-In Retainers
    GM95689Courtesy of GENERAL MOTORS CORP.
  1. Insert the I/P courtesy lamp down through the opening in the closeout panel.
  2. Install the closeout panel into position.
  3. Secure the closeout panel push-in retainers to the I/P lower support beam.
  4. Secure the notch in the RH forward edge of the closeout panel to the tab on the accelerator pedal bracket.

    Align, then push up to secure.

  5. Install the push-on retaining nut to the steering column bracket stud.
    6. Fig 2: I/P Courtesy Lamp Assembly To RH Lower Closeout Panel
    GM64671Courtesy of GENERAL MOTORS CORP.
  6. Align the I/P courtesy lamp to the closeout panel opening, then push to secure.
scientia non olet · About LEMON Manuals