LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1513 (Lighting Systems) >> Repair Instructions >> Repeater Lamp Replacement (Europe Japan) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Side Repeater Lamp Socket To Front Side Repeater Lamp Assembly
    GM95535Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheelhouse filler panel. Refer to Wheelhouse Filler Replacement in Body Front End.
  2. Remove the front side repeater lamp socket from the front side repeater lamp assembly.
  3. Remove the lamp assembly retaining nuts.
  4. Remove the lamp assembly.
scientia non olet · About LEMON Manuals