Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Fuel and EVAP Pipe Caution in Cautions and Notices.

Fig 1: Left Fuel Rail Cover

Courtesy of GENERAL MOTORS CORP.

Remove the left fuel rail cover.

Fig 2: Intake Manifold EVAP Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the quick-connect fittings at the intake manifold and the EVAP canister purge valve. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
Remove the EVAP pipe.
Cap the intake manifold pipe and the EVAP canister purge valve in order to prevent possible contamination.