Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Left Fuel Rail Cover

Courtesy of GENERAL MOTORS CORP.

Remove the left fuel rail cover.

Fig 2: Intake Manifold EVAP Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the engine vacuum pipe from the EVAP canister purge solenoid valve to intake manifold EVAP pipe.

Fig 3: EVAP Canister Purge Valve

Courtesy of GENERAL MOTORS CORP.

Disconnect the engine purge pipe from the EVAP canister purge valve.

Fig 4: EVAP Canister Purge Valve & Purge Bracket

Courtesy of GENERAL MOTORS CORP.

Disconnect the EVAP canister purge valve harness connector.
Remove the EVAP canister purge valve from the purge bracket.