Conditions for Setting the DTC

DTC P0756 sets if both of the following conditions occur:

Condition 1

• The PCM commands first gear for 2 seconds.
• The estimated gear ratio is 0 to 1.4.
• The engine torque is 68-542 N.m (50-400 lb ft).
• The transmission output speed is 200 RPM or greater.
• TCC Slip Speed is -3,000 to +200 RPM.
• All conditions are met for 1 second.

Condition 2

• The PCM commands second gear for 1 second.
• The estimated gear ratio is 0.9 to 1.2.
• The engine torque is 68-542 N.m (50-400 lb ft).
• Speed ratio is 0.5 or greater.
• All conditions are met for 2 seconds.