LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1507 (Manual Transmission -- TREMEC 6-Speed) >> Repair Instructions >> Shift Control Knob Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Gear Shift Knob
    GM71520Courtesy of GENERAL MOTORS CORP.
  1. Screw the shift control knob onto the shift control lever until the knob bottoms out.
    2. Fig 2: Shift Control Knob Retainer, Shift Control Knob Button
    GM71521Courtesy of GENERAL MOTORS CORP.
  2. Unscrew the shift control knob just enough to align the retainer slot with the slot on the shift control lever.
  3. Install the shift control knob retainer (1) into the slots and seat fully.
  4. Install the shift control knob button.
scientia non olet · About LEMON Manuals