Action Taken When the DTC Sets

If equipped, the following actions occur:

• The EBCM disables the DRP/ABS/TCS/VSES for the duration of the ignition cycle.
• The EBCM disables the variable effort steering (VES) for the duration of the ignition cycle.
• The ABS indicator turns ON.
• The Traction Control and Active Handling indicator turns ON.
• The DIC displays the following messages:
  • Service ABS
  • Service Traction System
  • Service Active Handling
• The red Brake warning indicator turns ON.
• The EBCM will also set DTC C1248.
• The EBCM will not send serial data messages.
• The EBCM will not send the requested torque output to the PCM.
• The EBCM will not send the steering angle PWM output to the electronic suspension control module.