Action Taken When the DTC Sets

If equipped, the following actions occur:

• The EBCM disables the ABS/TCS/VSES for the duration of the ignition cycle.
• The ABS indicator turns ON.
• The Traction Control and Active Handling indicator turns ON.
• The DIC displays the following messages:
  • Service ABS
  • Service Traction System
  • Service Active Handling
• The DRP does not function optimally, or with system voltage less than 8.5 volts, the EBCM disables the DRP for the duration of the ignition cycle.
• When the EBCM disables the DRP, the following actions also occur:
  • The EBCM will also set DTC C1248.
  • The red Brake warning indicator turns ON.