Diagnostic Aids

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

This DTC may be stored as a history DTC without affecting the operation of the module. If stored only as a history DTC and not retrieved as a current DTC, do not replace the control module.
If this DTC is retrieved as both a current and history DTC, replace the module.

DTC B0605

Step	Action	Yes	No
1	Perform the appropriate Diagnostic System Check for the system exhibiting symptoms. Did you perform the Diagnostic System Check?	Go to Step 2	Go to Control Module References
2	Is DTC received as a current DTC?	Go to Step 3	Go to Diagnostic Aids
3	IMPORTANT: Perform the control module programming/configuration procedure if required. Replace the module. Refer to Control Module References .Did you complete the replacement?	Go to Step 4	-
4	Use the scan tool in order to clear the DTCs. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text. Does the DTC reset?	Go to Step 2	System OK