LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1501 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter - Right (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tumbling Third Row Seats To Cargo Position
    GM799604Courtesy of GENERAL MOTORS CORP.
  1. Remove the cargo shelf.
  2. Tumble the third row seats to the cargo position.
  3. Remove the right body side window rear garnish molding. Refer to Garnish Molding Replacement - Body Side Window - Rear (TrailBlazer EXT, Envoy XL) .
  4. Remove the right body side window forward garnish molding. Refer to Garnish Molding Replacement - Body Side Window - Front (TrailBlazer EXT, Envoy XL) .
  5. Remove the liftgate sill plate. Refer to DOOR SILL PLATE REPLACEMENT-Lift Gate .
  6. Remove the right rear door sill panel. Refer to Door Sill Plate Replacement - Rear (TrailBlazer, Envoy, Bravada)  or Door Sill Plate Replacement - Rear (TrailBlazer EXT, Envoy XL) .
  7. Remove the lower seat belt anchor bolt.
    8. Fig 2: Rear Quarter Trim Panel And Screws
    GM799086Courtesy of GENERAL MOTORS CORP.
  8. Release the five screws that retain the rear quarter trim panel to the body.
  9. Remove the rear quarter trim panel from the vehicle.
scientia non olet · About LEMON Manuals