LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1501 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter - Left (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Trim Panel - Rear Quarter - Left (TrailBlazer, Envoy, Bravada)
    GM740436Courtesy of GENERAL MOTORS CORP.
  1. Remove the cargo shade/cover.
  2. Remove the left body side upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (TrailBlazer, Envoy, Bravada) .
  3. Remove the liftgate sill plate. Refer to DOOR SILL PLATE REPLACEMENT-Lift Gate .
  4. Remove the left rear door sill panel. Refer to Door Sill Plate Replacement - Rear (TrailBlazer, Envoy, Bravada)  or Door Sill Plate Replacement - Rear (TrailBlazer EXT, Envoy XL) .
  5. Remove the lower seat belt anchor bolt.
  6. Release the clips that retain the trim panel to the body.
  7. Remove the trim panel from the vehicle.