Installation Procedure
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the fan to the fan clutch.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the 4 bolts to the fan blade and tighten.
Tighten
Tighten the bolts to 27 N.m (20 lb ft).
- Install the cooling fan and shroud. Refer to COOLING FAN AND SHROUD REPLACEMENT .