LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1497 (Engine Mechanical - 4.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Installation

Crankshaft Rear Oil Seal Installation

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 44227  Rear Seal Installer

  1. Use the plastic installation sleeve supplied with the new seal when installing a new seal.

    Use J 44227  to install the crankshaft rear oil seal

  2. Remove J 44227  .
    Fig 1: Installing Crankshaft Rear Oil Seal
    G02128935Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals