Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Make note of the routing in order to aid in reassembly.

Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the vent hose from the top of the rear axle.

Fig 1: Removing Vent Hose From Top Of Rear Axle
Courtesy of GENERAL MOTORS CORP.
Remove the vent hose from the clip attached to the frame.

Fig 2: Removing Vent Hose From Clip Attached To Frame
Courtesy of GENERAL MOTORS CORP.