LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1489 (Tires And Wheels) >> Repair Instructions >> Tire and Wheel Removal and Installation >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle with safety stands.
  2. Remove the wheel hub cap, if equipped.
  3. Remove the wheel nuts. Mark the location of the tire and wheel assembly to the hub assembly.
  4. Remove the tire and wheel assembly.
  5. Clean the wheel nuts, studs, and the wheel and rotor mounting surfaces.
    Fig 1: Removing Tire And Wheel Assembly
    G01597448Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals