LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1484 (HVAC Systems - Automatic) >> Diagnostic Information and Procedures >> Ambient Air Temperature Update Procedure

Ambient Air Temperature Update Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

The HVAC control module will not request compressor clutch engagement when the ambient air temperature display is less than 5°C (40°F). In order to inspect compressor clutch operation during cold weather conditions, the vehicle must be brought inside and the ambient air temperature display must be updated.

To update the ambient air temperature display on the HVAC control module, perform the following procedure:

  1. Turn ON the ignition.
  2. Simultaneously press the MODE, FRONT DEFROST and REAR DEFROST switches.