LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1482 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Evaporator Block Replacement - Auxiliary >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, 2003 Chevrolet TrailBlazer, and 2002 Oldsmobile Bravada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the evaporator block-auxiliary (1) to the HVAC module-auxiliary.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the Torx studs to the evaporator block-auxiliary.

    Tighten 

    Tighten the studs to 14 N.m (124 lb in).

  3. Install the HVAC module-auxiliary. Refer to HVAC MODULE REPLACEMENT - AUXILIARY .
    Fig 1: Installing Evaporator Block-Auxiliary To HVAC Module-Auxiliary
    G01596695Courtesy of GENERAL MOTORS CORP.