Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) in Instrument Panel, Gages and Console.

Fig 1: View Of Instrument Panel (I/P) Upper Trim Pad
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the speaker electrical connector does not fall into the speaker opening.
Remove the 3 screws that retain the speaker to the instrument panel (IP) substrate.

Fig 2: Removing/Installing Speaker & Retaining Screws To Instrument Panel (IP) Substrate
Courtesy of GENERAL MOTORS CORP.
Disconnect the speaker electrical connector.
Remove the speaker from the IP.