LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1468 (Engine Exhaust System) >> Repair Instructions >> Exhaust Muffler Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Removing/Installing Exhaust Muffler Heat Shield
    GM753690Courtesy of GENERAL MOTORS CORP.
  2. Remove the catalytic converter heat shield rear 2 bolts where the catalytic converter heat shield connects to the muffler heat shield.
  3. Remove the remaining exhaust muffler heat shield bolts and remove the heat shield from the floor panel studs.
scientia non olet · About LEMON Manuals