Special Tools
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Number/Description |
|---|---|
| J 21426 Extension Housing Seal Installer |
|
| J 22536 Pinion Driver |
|
| J 22779 Side Bearing Backlash Gage |
|
| J 22888-D Side Bearing Remover Kit |
|
| J 22888-20A Universal Two Jaw Puller |
|
| J 22912-01 Split-Plate Bearing Puller |
|
| J 23690 Bearing Installer |
|
| J 25025 Guide Pins |
|
| J 25588 Side Bearing Shim Installer |
|
| J 2619-01 Slide Hammer with Adapter |
|
| J 29369-1 Bushing and Bearing Remover |
|
| J 29369-2 Bushing and Bearing Remover (2"-3") |
|
| J 29763 Static Timing Gage |
|
| J 3289-20 Holding Fixture |
|
| J 33782 Pinion Oil Seal Installer |
|
| J 33785 Pinion Bearing Installer |
|
| J 33790 Differential Side Bearing Installer |
|
| J 33838 Pinion Setting Gage |
|
| J 34178 Spreader Gage Adapter |
|
| J 34925 Pinion Setting Gage and Components |
|
| J 38694 Extension Housing Oil Pump/Seal Installer |
|
| J 42213 Adjuster Sleeve Socket |
|
| J 45104 Axle Remover Adapter |
|
| J 45222 Axle Housing Spreader |
|
| J 45224 Side Bearing Adjuster |
|
| J 45225 Axle Seal Installer |
|
| J 45228 Pinion Bearing Cup Remover/Installer |
|
| J 45230 Pinion Setting Gage Block |
|
| J 45232 Differential Bearing Adjuster Needle Bearing Replacer - LH |
|
| J 45233 Differential Bearing Adjuster Needle Bearing Replacer - RH |
|
| J 45234 Pinion Remover - 7.25 inch Axle |
|
| J 45359 Axle Seal Installer |
|
| J 6125-B Slide Hammer |
|
| J 7817 Outer Bearing Race Installer |
|
| J 8001 Dial Indicator Set |
|
| J 8001-2 Dial Indicator Sleeve |
|
| J 8001-3 Dial Indicator |
|
| J 8092 Universal Driver Handle - 3/4 in - 10 |
|
| J 8107-2 Side Bearing Puller Pilot |
|
| J 8608 Rear Pinion Bearing Race Installer |
|
| J 8614-01 Flange and Pulley Holder Tool |