LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1460 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft insulator clamp mounting bolts.
    Fig 1: View Of Stabilizer Shaft, Insulator, Insulator Clamp & Mounting Bolts
    GM1257519Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  4. Lower the stabilizer shaft and remove the stabilizer shaft insulator.
scientia non olet · About LEMON Manuals