LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1459 (Rear Drive Axle) >> Repair Instructions >> Vent Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Make note of the routing in order to aid in reassembly.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Fig 1: Rear Axle Vent Hose
    GM788622Courtesy of GENERAL MOTORS CORP.
  3. Remove the vent hose from the top of the rear axle.
  4. Fig 2: Removing/Installing Vent Hose From Clip
    GM788624Courtesy of GENERAL MOTORS CORP.
  5. Remove the vent hose from the clip attached to the frame.