Drive Pinion Bearings Replacement: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 7817 Outer Bearing Race Installer
- J 8092 Universal Driver Handle- 3/4 in - 10
- J 8608 Rear Pinion Bearing Race Installer
- J 8611-01 Rear Pinion Bearing Race Installer. See Special Tools and Equipment .
- J 8614-01 Flange and Pulley Holding Tool
- J 22912-01 Split-Plate Bearing Puller
- J 24433 Pinion Cone and Side Bearing Installer. See Special Tools and Equipment .
- J 33782 Pinion Oil Seal Installer
- J 38694 Extension Housing Oil Pump/Seal Installer
- J 45871 Pinion Bearing Remover. See Special Tools and Equipment .