Accumulator Timer
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
The primary purpose of the accumulator timer is to detect conditions in which excessive activity may occur. The conditions are generally as follows: in the compress mode the existences of pneumatic leaks in the system, in the exhaust mode the existence of pneumatic blockage or unloaded vehicle conditions. The accumulator shall keep track of the accumulated run time of the compressor. If the accumulator timer reaches its calibratable limit the output function will be disabled until the accumulator is reset. The accumulator timer will be reset with each transition into the RUN power mode or if the complementary output activation is required.