LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1451 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Outlet (LM4) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Radiator Outlet Hose From Engine
    GM871547Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator outlet hose to the engine (5).
  2. Using J 38185  reposition the radiator outlet hose clamp (3).
  3. Fig 2: Removing/Installing Radiator Outlet Hose From Radiator
    GM871546Courtesy of GENERAL MOTORS CORP.
  4. Install the radiator outlet hose (2) to the radiator (1).
  5. Using J 38185  reposition the radiator outlet hose clamp (3).
  6. Lower the vehicle.
  7. Fill the cooling system. Refer to Draining and Filling Cooling System (LL8)  or Draining and Filling Cooling System (LM4) .