LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1451 (Engine Cooling System) >> Repair Instructions >> Fan Clutch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .
  2. Fig 1: View Of Fan Blade & Fan Clutch
    GM721992Courtesy of GENERAL MOTORS CORP.
  3. Remove the push-pin and release the fan clutch electrical connector from the fan shroud.
  4. Remove the fan clutch from the fan shroud.
  5. Remove the bolts retaining the fan blade to the fan clutch.
  6. Separate the fan blade from the fan clutch.