LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1451 (Engine Cooling System) >> Repair Instructions >> Coolant Recovery Reservoir Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.2L or to Air Cleaner Assembly Replacement in Engine Controls - 5.3L.
    2. Fig 1: Removing/Installing Coolant Recovery Reservoir
    GM769224Courtesy of GENERAL MOTORS CORP.
  2. Remove the accumulator. Refer to Accumulator Replacement .
  3. Remove the coolant hoses from the coolant recovery reservoir and plug the hoses and the coolant recovery reservoir outlets with suitable plugs (2).
  4. Remove the nut and bolt securing the coolant recovery reservoir.
  5. Remove the coolant recovery reservoir.
scientia non olet · About LEMON Manuals