Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Air Bleed Hose & Pipe

Courtesy of GENERAL MOTORS CORP.

Install the coolant air bleed hose (1) to the pipe (2).
Position the coolant air bleed hose clamp at the pipe.

Fig 2: Removing/Installing Coolant Air Bleed Hose From Throttle Body

Courtesy of GENERAL MOTORS CORP.

Install the coolant air bleed hose to the throttle body.
Position the coolant air bleed hose clamp at the throttle body.
Add engine coolant, if necessary.