LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1449 (Automatic Transmission - 4L60-E/4L65-E (Introduction, Service & Replacement)) >> Repair Instructions >> Transmission Mount Replacement (5.3L) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Mount To Transmission Support
    GM744176Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the transmission with a suitable jack.
  3. Remove the nuts securing the transmission mount to the transmission support.
  4. Fig 2: View Of Transmission Crossmember Support
    GM752134Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission support from the vehicle. Refer to Transmission Support Replacement in Frame and Underbody.
  6. Fig 3: View Of Transmission Mount Bolts (5.3L)
    GM1293735Courtesy of GENERAL MOTORS CORP.
  7. Remove the transmission mount bolts (1, 2).
  8. Fig 4: View Of Transmission Mount (5.3L)
    GM1293472Courtesy of GENERAL MOTORS CORP.
  9. Remove the transmission mount from the vehicle.