Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission oil pan and filter. Refer to Automatic Transmission Fluid/Filter Replacement .
- Remove the 1-2 accumulator if necessary. Refer to Accumulator Assembly, Spacer Plate, and Gaskets .
- Disconnect the internal wiring harness electrical connectors from the following components:
- Transmission fluid pressure switch (1)
- 1-2 shift control solenoid (2)
- 2-3 shift control solenoid (3)
- Pressure control solenoid (4)
- TCC PWM solenoid (5)
- 3-2 control solenoid (6)
- Remove the pressure control solenoid retainer.
- Remove the pressure control solenoid.
- Remove the 1-2 and 2-3 shift solenoid retainers.
- Remove the 1-2 and 2-3 shift solenoids.
- Remove the 3-2 control solenoid retainer.
- Remove the 3-2 control solenoid.
IMPORTANT:
Do not remove the valve body for the following procedures. Removal of the 1-2 accumulator is necessary only if servicing the pressure control solenoid.