LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1448 (HVAC Systems - General Servicing) >> Repair Instructions >> Evaporator Block Replacement - Auxiliary >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Auxiliary Evaporator Block
    GM816374Courtesy of GENERAL MOTORS CORP.
  1. Install the evaporator block-auxiliary (1) to the HVAC module-auxiliary.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the TORX studs to the evaporator block-auxiliary.

    Tighten:  Tighten the studs to 14 N.m (124 lb in).

  3. Install the HVAC module-auxiliary. Refer to HVAC Module Replacement - Auxiliary .
scientia non olet · About LEMON Manuals